Nanjing Clover Medical Technology Co., Ltd.
 Tel: +8625-8461 0201
 Fax: +8625-8461 0406
 Email: [email protected] 

 Home

 About Us

 Contact Clover

 Mobile Incinerator

 Small Incinerator Model

 Model TS10 PLC (10kg/hr.)

 Model TS20 PLC (20kg/hr.)

 Model TS30 PLC (30kg/hr.)

 Model TS50 PLC (50kg/hr.)

 Model TS100 PLC (100kg/hr.)

 Large Incinerator Model

 Model YD-30 (30kgs/Hr.)

 Model YD-50 (50kgs/Hr.)

 Model YD-100 (100kgs/Hr.)

 Model YD-150 (150kgs/Hr.)

 Model YD-200 (200kgs/Hr.)

 Model YD-300 (300kgs/Hr.)

 Model YD-500 (500kgs/Hr.)

 Model YD-600 (600kgs/Hr.)

 Incinerator Introduction

 Company Certificate

Nanjing Clover Medical Technology Co., Ltd.

 Email: [email protected]   Follow us twitter.com/hiclovercom

 Incinerator Model: TS30 PLC

APPENDIX 3:

1. GENERAL SPECIFICATIONS:

The incinerator must be designated for the destruction of all types of waste produced by the Center for Health (waste type hospital, clinic, medical laboratory for destructive capacity of 30kg / h) .

Pyrolytic gasification combustion control shall:

• Prevent development of black smoke and dust formation tine loading of waste;
• Provide regular and complete combustion of the waste;
• Provide controlled guaranteeing the absence of color, cloud of smoke or burning odor;
• Allow limited fuel consumption

The incinerator with pyrolytic combustion must have:

1. Combustor:

- Chamber strong steel support legs sheet;

- The lining is made ​​of refractory bricks and a thermal insulation ensuring a minimum temperature of the sheet;

- The sole combustion is composed of a refractory lining specially designed to meet the thermal, mechanical and corrosive liquid waste requirements and molten glass;

- The dimensions of the floor are equipped laterally primary air nozzles that fuel combustion;

- The hearth is equipped with a stirring system of waste combustion is controlled switch;

- The recovery operation of the ashes will take place once a day line before starting the day's operation.

Composition of the refractory lining:

* Insulation:

- Operating temperature:                 1000 ° C max

- Nature:                                   Calcium Silicate

- Thickness:                              80 mm

* Refractory:

- Operating temperature:                 1650 ° C max

- Nature:                                   Refractory bricks with 42 alumina

- Thickness:                              110mm

Burner combustion:

- The combustion chamber is equipped with a burner to line to ensure correct temperature for the total destruction of waste combustion;

- Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.

Air fan:

- A primary air and secondary air fan provides the necessary oxygen delivery

- There is a motor operated valve that controls the flow according to the combustion.

- The pressure of the fan is 500 mm CE to pierce the mass of waste during combustion.

1. Post - combustion chamber:

- Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is to;

- A secondary air injection is expected and provides perfect oxygen content;

- The burner ensures a minimum temperature of 1100 ° C continuous;

- The design of this burner is similar to combustion burners;

- The afterburner is equipped with access doors in order to ensure regular cleaning of dust;

- The afterburner is lined with high thermal insulation with a thickness of 150 mm

1. Cabinet, control and regulation:

- The entire installation will conform to European standards (EU)

- The electrical power is 220V 50Hz single phase.

- Regulators of temperature with digital display:

• 1 to regulate the temperature of the combustion chamber
• 1 for controlling the temperature of the afterburner
• The manual controls are provided on each item.

2. PRODUCT DIMENSIONS

          Nanjing Clover Medical Technology Co., Ltd.