incinerator manufacturer china

The sludge shall be properly atomized by means of compressed air in the burner in order to ensure complete combustion of

the sludge. Both compressor and receiver shall be

mounted on the same slide as the incinerator.

 

 

The incinerator shall also supply digital mimic window for tracking of the feed rate of the sludge pumps as well as

the feed rate of DO being used. Digital observation of the flue gas temperature shall also be supplied. The digital

display shall be able to display alarms and faults. It shall be equipped with appropriate control keys that allow

scrolling in the alarms, changing set points, viewing data, acknowledging and resetting of the alarms and faults.

 

 

An exhaust stack shall be provided that will discharge its flue into the atmosphere. The pile shall be at least 15 m

high and shall be fit to function in marine and corrosive environments. The offered stack shall be of heavy duty design,

inclusive of elastic compensators, bellows, transition piece and shall be designed to withstand highly corrosive

environment, high cyclic stresses and capable of resisting cyclonic gusts of at least 280 km/hour.

 

 

The incinerator body shall be of dual casing type, that is, air cooled. The incinerator shall also function on a

negative draught that’s maintained by way of an ejector in order to prevent smoke and gases from leaking into the

surrounding area. Air for combustion shall be supplied in surplus in order to enable complete combustion of sludge.

The incinerator body shall be of dual casing type, that is, air cooled. The incinerator shall also operate on a

negative draught that is maintained by means of an ejector so as to prevent gases and smoke from leaking to the

surrounding area. Air for combustion shall be supplied in excess so as to enable complete combustion of sludge.

Categories: