Including:Incinerator: Structure to be specified
– A receiving cage for biomedical waste;
– A combustion chamber using a chimney using a filter to keep the ashes;
Chimney section: about 300 cm; using a minimum height of 6 m
Door dimensions: approximately 50×60 cm
Supplied with a 500 liters fuel tank and all necessary accessories for installation.
Refractory
Temperature of more than 1100 ° C + obtained;
Ability: 20-50 kg / hour
– INCINERATOR for pharmaceutical waste treatment with a scrubbing system
Together with the following technical data:
1. 1 pharma solid waste incinerator unit comprising two combustion chambers and based on steel base with scrubbing
system.
3. Ability: Approximated 150 kg/hr. Over 10 hrs.
4. Wastes characteristics:
· BULK density: 70 — 100 kg/ bm³.
· Calorific value: 2000-3000 kcal / hr.
· Moisture content: 20-30percent by weight.
· Ash content: 2 — 8 percent by weight.
· Vinyl content: 15-20 % by weight.
5. Two combustion chambers.
6. Operating temperatures:
· First chamber: not less than 700 – 800 °c.
· Second chamber: not less than 1200 °c (during steady operation).
7. The burners should be automatically switched off if some of the combustion chambers is open.
8. The burners of the first and second combustion chambers are chosen for burning diesel oil (light fuel).
9. Automatic loader and unloader to be provided.
10. Exhaust gases to be comply with International Environmental code and requirements.
