incinerator for medical waste

Description    Dimensions
Fuel    diesel oil
. Afterburner
. Combustion
– The hearth Comes with a stirring system of waste combustion is controlled switch;
– Thickness:                    110mm

Burner combustion:

– The combustion chamber is equipped with a burner to line to guarantee correct temperature for the total destruction of waste combustion;
‘ TEMPERATURES:
1100 ° C
? 1 for controlling the temperature of the afterburner
Post combustion: 0.2m3
– The burner guarantees a minimum temperature of 1100 ° C continuous;
– Character:                    Refractory bricks with 42 alumina

0.11 KW0

Fan power    0.37 kW

0.11 KW
? Provide controlled guaranteeing the absence of colour, cloud of smoke or burning odor;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
– The pressure of the fan is 500 mm CE to pierce the mass of waste during combustion.

b. Post – combustion chamber:

– Treat the gasoline has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is to;
GENERAL SPECIFICATIONS:

The incinerator for medical waste needs to be designated for the destruction of all kinds of waste produced by the Center for Health (waste type hospital, clinic, medical laboratory for destructive capacity of 30kg / h).

Pyrolytic gasification combustion control shall:

? Prevent growth of black smoke and dust formation tine loading of waste;
– The design of the burner is similar to combustion burners;
– The electric power is 220V 50Hz single phase.
* Refractory:
– A secondary air injection is expected and provides perfect oxygen content;
* Insulation:
– The restoration operation of the ashes will occur once a day line before beginning the day’s operation.

Composition of the refractory lining:
– The dimensions of the floor are equipped laterally main air nozzles that fuel combustion;
– Operating temperature:             1000 ° C max
Air fan:
– The entire installation will conform to European standards (EU)
? Allow limited fuel consumption

The incinerator with pyrolytic combustion must have:

a. Combustor:

– Chamber strong steel support legs sheet;
? 1 to modulate the temperature of the combustion chamber
– The afterburner Comes with access doors so as to ensure regular cleaning of dust;
Mixed combustion chamber: 0.3m3
Volume of combustion

chamber Combustion: 0.3 m3
900 ° C
– Character:                    Calcium Silicate

chamber Combustion: 0.3 m3
Post combustion: 0.2m3
Mixed combustion chamber: 0.3m3
` TEMPERATURES:
. Combustion
. Afterburner
900 ° C
1100 ° C
POWER BURNER
Combustion
Afterburner

0.11 KW
0.11 KW0

Fan power    0.37 kW

Categories: