{"id":3806,"date":"2022-04-02T13:39:04","date_gmt":"2022-04-02T13:39:04","guid":{"rendered":"https:\/\/www.hiclover.com\/?p=3806"},"modified":"2022-04-02T13:39:04","modified_gmt":"2022-04-02T13:39:04","slug":"china-medical-waste-incinerator","status":"publish","type":"post","link":"https:\/\/www.hiclover.com\/backup\/china-medical-waste-incinerator\/","title":{"rendered":"china medical waste incinerator"},"content":{"rendered":"<p> Incinerate: medical waste and general waste <\/p>\n<p> Capacity to burn waste: 400 &#8212; 500 kg\/hr <\/p>\n<p> Fuel: Diesel <\/p>\n<p> Fuel Consumption: 10 litres\/hr maximum <\/p>\n<p> Incineration temperature: 950 &#8211; 1300 \u00b0c <\/p>\n<p> Casing: thick (min 5 mm) Stainless steel casing and completely <\/p>\n<p> insulated to withstand sea humidity <\/p>\n<p> Voltage: 220\/240 V or 380\/415V <\/p>\n<p> Frequency: 50 Hz <\/p>\n<p> Feeding: automatic <\/p>\n<p> Ash 1 leftovers removal: Automatic <\/p>\n<p> Fuel gas filtration system: Yes <\/p>\n<p> Warranty: 12 months <\/p>\n<p> Staff training: Operator &#038; Maintenance staff <\/p>\n<p> Operation and service manuals: 3 sets every <\/p>\n<p> &nbsp; <\/p>\n<ul>\n<li>With Chassis to be Mounted in truck\/lorry<\/li>\n<\/ul>\n<p> &nbsp; <\/p>\n<ul>\n<li>May have a primary and secondary combustion chamber<\/li>\n<\/ul>\n<p> &nbsp; <\/p>\n<ul>\n<li>Must have a dilution chamber<\/li>\n<\/ul>\n<p> &nbsp; <\/p>\n<ul>\n<li>Capacity: 100 Kgs per hour<\/li>\n<\/ul>\n<p> &nbsp; <\/p>\n<ul>\n<li>Power Source: Diesel or Natural Gas or Liquified Natural Gas<\/li>\n<\/ul>\n<p> &nbsp; <\/p>\n<ul>\n<li>General wastes produced on a daily basis include paper, plastic, organic materials, boxes, plastic<\/li>\n<\/ul>\n<p> containers, leaves, etc; <\/p>\n<p> 1. The double chamber incinerator shall preferably be designed.  Air distribution in the primary and secondary chamber shall be <\/p>\n<p> regulated between 30%-80% and 170%-120% of stoichiometric amount respectively.   The combustion air shall be provided through a <\/p>\n<p> separate forced draft fan accounting for the air provided through burners.  Provision shall be made in the primary <\/p>\n<p> chamber to gauge the water column pressure.  <\/p>\n<p> chamber and 1200 dc in the secondary chamber.  The refractory&#038; insulation bricks shall have minimum 115mm thickness every <\/p>\n<ol start=\"2\">\n<li>Capacity : up to 4000kg burn not less than 500 kg \/hr<\/li>\n<li>The refractory lining of the chamber shall be strong enough to sustain minimum temperature of 1000dc in the primary<\/li>\n<\/ol>\n<p> &#038; conform to IS:8-1983 &#038; IS:2042-1972 respectively.  <\/p>\n<p> heat resistant aluminium paint suitable to withstand temp.of 250 dc with appropriate surface preparation.  Refractory lining <\/p>\n<ol start=\"4\">\n<li>The incinerator shell shall be made of SS\/MS plate of adequate thickness (minimum 5mm) and painted externally with<\/li>\n<\/ol>\n<p> of the hot duct shall be done with refractory castable (minimum 45mm thick)&#038; insulation castable(minimum 80mm thick).  <\/p>\n<p> Ceramic wool shall be used at sexy duct flanges &#038; expansion joints.  <\/p>\n<p> 5. There shall be a separate burner each for the primary &#038; secondary chamber.  The heat input capacity of each burner <\/p>\n<p> shall be sufficient to increase the temp.in the primary &#038; secondary chambers as 800+\/- 50dc and 1050+\/-50dc respectively <\/p>\n<p> within maximum of 60 minutes before waste charging.  The burners shall have automatic switching off\/on control to <\/p>\n<p> avoid the changes of temperatures beyond the essential temp.range.  <\/p>\n<p> 6. Incinerator shall have computer or graphic recording device that will automatically and continuously monitor and <\/p>\n<p> record dates, time of day, batch sequential number,Co,Co2,O2 in gaseous emission shall also be\u00a0 measured daily.  <\/p>\n<p> 6mm plate steel sheel structure <\/p>\n<p> 11cm 1400 o C Refractory L iner <\/p>\n<p> Temperature controlled Burners <\/p>\n<p> Secondary combustion Burners <\/p>\n<p> Interlock Switch on Load Doors <\/p>\n<p> Independent Ash Door <\/p>\n<p> One Second secondary Residence @ 1000 o C <\/p>\n<p> 400 \u00b0 C Silicone Based Paint Finish.  <\/p>\n<p> Alloy Temperature Sensor <\/p>\n<p> Factory wired and tested <\/p>\n<p> Capacity-20 kg \/ hr <\/p>\n<p> Main Chamber-1607 L <\/p>\n<p> Hearth Area-1:36 sq. m <\/p>\n<p> Secondary Chamber-694 L <\/p>\n<p> Primary Burner (petroleum )-420,000 btu <\/p>\n<p> Secondary Burner (petroleum )-900,000 btu <\/p>\n<p> secondary Combustion-1\/6 hp <\/p>\n<p> Exhaust Stack-46cm x 6m <\/p>\n<p> Electrical Service-220\/50 <\/p>\n<p> Weight System-5.700 kg <\/p>\n<p> Dimension &#8220;D&#8221;-152cm <\/p>\n<p> Load Port Height- 60x 60 cm <\/p>\n<p> Ash Port Height -36 x 36 cm <\/p>\n<p> with minimum of 3mm thick natural tough rubber Appropriate for the duty conditions and shall also conform to IS:4682 part <\/p>\n<ol start=\"7\">\n<li>Structural design of the chimney\/stack shall be as per IS:6533-1989.The chimney\/stack shall be lined from inside<\/li>\n<\/ol>\n<p> I-1968 to avoid corrosion to oxygen and acids in the flue gas.  <\/p>\n<p> INCINERATEUR DE DECHETS HOSPITALIER <\/p>\n<p>INCINERATEUR DE DECHETS HOSPITALIER<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Incinerate: medical waste and general waste Capacity to burn waste: 400 &#8212; 500 kg\/hr Fuel: Diesel Fuel Consumption: 10 litres\/hr maximum Incineration temperature: 950 &#8211; 1300 \u00b0c Casing: thick (min 5 mm) Stainless steel casing and completely insulated to withstand sea humidity Voltage: 220\/240 V or 380\/415V Frequency: 50 Hz Feeding: automatic Ash 1 leftovers [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":2015,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_joinchat":[],"footnotes":""},"categories":[20],"tags":[],"class_list":["post-3806","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-waste-incinerator"],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/posts\/3806","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/comments?post=3806"}],"version-history":[{"count":0,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/posts\/3806\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/media\/2015"}],"wp:attachment":[{"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/media?parent=3806"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/categories?post=3806"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.hiclover.com\/backup\/wp-json\/wp\/v2\/tags?post=3806"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}