¡¡
¡¡
|
¡¡
Nanjing
Clover Medical Technology Co.,Ltd.
Tel:
+86-25-8461 0201
Fax:
+86-25-8461 0406
Website:
www.cloveridea.com.cn
Email:
cloverincinerator@Gmail.com
About Us
Small Incinerator
Incinerator YD10C
Incinerator YD20C
Incinerator YD30C
Incinerator YD50C
Medical Incinerator
Incinerator YD30
Incinerator YD50
Incinerator YD100
Incinerator YD150
Incinerator YD300
Incinerator YD500
Incinerator YZ20
Incinerator YZ50
Incinerator YZ100
Incinerator YZ150
Animal Cremation
Incinerator Burn Rate
10kgs per hour
20kgs per hour
30kgs per hour
50kgs per hour
100kgs per hour
150kgs per hour
300kgs per hour
500kgs per hour
Incinerator Burner
Light Oil Burner
Gas Burner
YZ Incinerator
Certificate
How to Buy Incinerator
Market Analytics
Contact Us
¡¡
¡¡
¡¡
¡¡
¡¡
|
CLOVER Incinerator
Call us on 0086-25-8461 0201
[email protected]
China Medical Incinerators /
Animal Cremation / Waste Incinerators
Principle of the Incinerator
equipment is incineration/combustion/burn. Generally, the function is waste
treatment for Solid waste, Liquid waste, Gas waste, etc.
The main body is one combustion chamber (at least), Refractory line or
firebrick, Insulation materials and the outer plate. Ignition element is
external oil or gas burner. The burner can be running until waste burnout but
for some waste like plastic, paper (sometime, mix coal with waste before
feeding), they can combustion itself after Ignition. During combustion, burner
has a fan itself for Oxygen supply and also protect burner avoid heat damage
from combustion chamber. And, there a external fan blow air into combustion
chamber. The Exhaust gas blow out after combustion.
Considering Environmental Protection requirements and rules, almost all
incinerator have secondary combustion chamber (after-burn, post-combustion),
even if third combustion chamber. The secondary burner burn the Exhaust gas from
primary combustion chamber, this technology make sure sufficient combustion, few
black smoke and smell.
The updated incinerator technology focus on Exhaust gas treatment to remove
Hazardous material and other function from incinerator, like heat recovery
(waste to energy), save fuel cost, PLC Automation operation.
In some Developed countries, some new waste treatment method like
High-temperature cooking, waste carbonization, crushing sterilization technology
is instead of incineration technology.
Model |
YD-150 |
Burning Rate |
150 kgs/hour |
Feed Capacity |
300 kgs |
Paimary Combustion Chamber |
1500 Liters |
Secondary Combustion Chamber |
500 Liters |
Mix Combustion Chamber |
Yes |
Smoke Filter Chamber |
Yes |
Feed Mode |
Manual |
Voltage |
220V/380V |
Power |
1.03Kw |
Fuel Type |
Diesel Oil/ Natural Gas/LPG |
Burner |
Italy Original |
Oil Consumption (Diesel Oil) |
17--36 kg/hour |
Gas Consumption (Natural Gas) |
11--36.7 m3/hour |
Internal Dimensions |
150 x 100 x 96cm (paimary chamber) |
External Dimensions |
240 x 170 x 380cm (without chimney) |
Temperature Monitor |
Yes |
Oil Tank Capacity(if oil fuel) |
300 Liters |
Door Opening |
59 x 81cm |
Chimney Length |
10.0 Meters |
Chimney Type |
Stainless Steel |
Equipment Gross Weight |
7000 kgs |
Operation Technical Specifications |
Paimary Chamber Temperature |
800¡æ--1000¡æ |
Secondary Chamber Temperature |
1000¡æ-1200¡æ |
Residency Time |
2.0 Sec. |
Burning Efficiency |
£¾98% |
Waste Lower Calorific Power |
3000Kcal |
¡¡
¡¡ |
¡¡ |
¡¡ |