¡¡

Nanjing Clover Medical Technology Co., Ltd.

¡¡ ¡¡
¡¡ Medical Incinerators /  Animal Crematory / MSW Incinerators ¡¡

 

¡¡ ¡¡ ¡¡




¡¡



¡¡

¡¡      
   ººÓï   
   English   
   P§å§ã§ã§Ü§Ú§Û ¡¡

 Nanjing Clover Medical Technology Co.,Ltd.
 Tel: +86-25-8461 0201
 Fax: +86-25-8461 0406
 Website:
www.clover-incinerator.com
 Email:
[email protected]
 Email:
[email protected]
 Service Skype ID: clover-incinerator

>About Us

>Company NewsNew

>Newsletters April 2012 (PDF)

>Catalogue 2012  (PDF)

>Incinerator Models

>Medical Incinerators

>MSW Incinerators

>Small Incinerators

>Pet Crematory

>Smoke Dust FilterNew

>Contact Us

 Medical Incinerator

¡î Model YD-30 Incinerator

¡î Model YD-50 Incinerator

¡î Model YD-100 Incinerator

¡î Model YD-200 Incinerator

¡î Model YD-150 Incinerator

¡î Model YD-300 Incinerator

¡î Model YD-500 Incinerator

¡î Model YD-600 IncineratorNew

 Large MSW Incinerator

¡î Model MSW1000 Incinerator

¡î Model MSW2000 Incinerator

¡î Model MSW3000 IncineratorNew

¡î Model MSW4000 Incinerator

¡î Model MSW5500 Incinerator

 Small Incinerator

¡î Model YD-10 Incinerator

¡î Model YD-15C Incinerator

¡î Model YD-20C Incinerator

¡î Model YD-30C Incinerator

¡î Model YD-50C Incinerator

 Pet Crematory

¡îAnimal Crematory A360

¡îAnimal Crematory A600

¡îAnimal Crematory A900New

¡îAnimal Crematory A1500

¡îAnimal Crematory A2400

¡îAnimal Crematory A4000

¡î Model SYC-50 Incinerator

¡î Model SYC-100 Incinerator

 Economical Incinerator

¡î Model YZ-20 Incinerator

¡î Model YZ-50 Incinerator

¡î Model YZ-100 Incinerator

¡î Model YZ-150 Incinerator


>Light Oil Burner

>Gas Burner

>Incinerator FAQ (PDF)

>How to Buy

>Photo Gallery 

>Certificate

Request Dealer

> Tiếng Việt

> SiteMap

>Incinerator News

>Incinerator Questions

>Incinerator Inquire in History

>Market Analytics

>Friendly Links

¡¡

¡¡

Incinerator Question

Call us on  0086-25-8461 0201  Email: [email protected]

¡¡

Date: 2013-06-10

  Incinerator Question:  

  Tag:  Kenya, Medical Incinerator Plant, Incinerator MSW1000

 

A.  Classification of Incinerators

Class 1: Industrial Plants Burning Waste as an Additional/Alternative Fuel

Incinerators in which the waste serves as the fuel or supplementary fuel in an industrial process (e.g. the use of cement kilns or any other industrial boilers or furnaces for the disposal of noxious or hazardous materials).

Class 2         Industrial Incinerators

Class 2A:      Commercial

Incinerators for the disposal of waste that contains hazardous, potential hazardous and bio-medical waste where the operator exceeds 100 Kg/day.

Class 2B:         Small Scale Incinerators for Private Use

Incinerators for the disposal of hazardous, potential hazardous and bio-medical waste where the operator does not exceed 100 kg/ day.

¡¡

Class 3: General waste Incinerators

Incinerators for general waste that is non toxic, non hazardous, non medical or does not  contain organic halogens, i.e., selected customs, police, contraband goods, offices waste, commercial waste  and industrial wastes) where the operator does not exceed 1 ton/ day.

 

STANDARDS, GUIDELINES, CRITERIA, PROCEDURE FOR INSTALLING/OPERATING INCINERATORS

 

No.

Parameter

Standards, Guideline, Criteria and Procedure

 

1

Basic Plant Design

An approved plant must have four distinct sections that demonstrate three principles of Turbulence, Residence Time and Temperature are inbuilt in the plant design .The regulated sections may include but not limited to:

 

Overall plant layout.

Feed chamber/ charging  

Primary Combustion Chamber.

Secondary Combustion Chamber.

Particulate Scrubbers--

Acid Gas Scrubbers

The stack/ chimney.

2

Feeding And Charging

Controlled hygienic, mechanical or automatic feeding methods have to be used which will not influence the air temperature in the primary and secondary chambers of the incinerator negatively.

 

No waste is to be fed into the incinerator:

 

1.                   Until the minimum temperatures have been reached.

Please  incorporate a mechanical feeder

2.            If the minimum combustion temperatures are not maintained.

3.            Whenever the previous charge has not been completely combusted in the case of batch feeding.

 

4.             Until such time as the addition of more waste will not cause the design parameters of the incinerator to be exceeded

 

3

Primary Combustion Chamber

The primary combustion chamber must:

 

1.             Be accepted as the primary combustion zone

2.             Be equipped with a burner/s burning gas/fuel or low sulphur liquid fuels. Other combustion methods will be judged on merits.

 

3.                 Ensure primary air supply is controlled efficiently

4.      Ensure minimum exit temperature is not less than 850oC

 

4

Secondary Combustion Chamber (Afterburner).

The secondary combustion chamber must:

 

1.             Be accepted as secondary combustion zone.

2.             Be fitted with secondary burner/s burning gas or low sulphur liquid fuel or any suitable fuel.

 

3.             Ensure secondary air supply is controlled efficiently.

4.             Ensure flame contact with all gases is achieved.

5.             Ensure residence time is not less than two (2) seconds.

6.             Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.¡ª

 

7.             Ensure the oxygen content of the emitted gases is not less than 11%.

8.             Ensure both primary and the combustion temperatures are maintained until all waste has been completely combusted

 

5

Particulate Removers

A mechanical particulate collector must be incorporated after secondary combustion chamber for removal of particulate pollutants entrained in the flue gas stream. The particulate collectors may include any of the following or a combination thereof:

 

Cyclone separator

Electrostatic precipitators

Fabric filters

6

Chimney / Stack

1.             The chimney should have a minimum height of 10 meters above ground level and clear the highest point of the building by not less than 3 meters for all roofs. The topography and height of adjacent buildings within 50 meters radius should be taken into account.

2.             If possible the chimney should be visible to the operator from the feeding area

3.             The addition of dilution air after combustion in order to achieve the requirement of these guidelines is unacceptable.

 

4.             The minimum exit velocity should be 10 m/s and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting gases. .

 

 

5.             Point for the measurement of emissions shall be provided.

 

 

7

Instrumentation

Instrument for determining the inside wall temperature and not burner flame temperature must be provided for both primary and secondary chambers.

 

2.             An audible and visible alarm must be installed to warn the operator when the secondary temperature drops to below the required temperature.

Please incorporate this alarm as it is a requirement.

3.             In addition to the above the following instruments may also be required.

A carbon monoxide and/or oxygen meter/recorder

A smoke density meter/recorder

A gas flow meter/recorder

A solid particulate meter/recorder

Any other instrument or measurement that may be considered necessary-

 

8

Location / Siting

1.             Must be sited in accordance with the relevant local municipal authority planning scheme, the topography of the area and be compatible with premises in the neighborhood,

 

2.                    Must be housed in a suitably ventilated room.

 

9

Emission Limits

1.             Combustion efficiency:

 

 

Combustion efficiency (CE) shall be at least 99.00%

The Combustion efficiency is computed as follows;

 

     C.E=             % CO2           x 100

                               % CO2 + CO

 

2.             The temperature of the primary chamber shall be 800 ¡À 50o C

 

3.             The secondary chamber  gas residence time shall be at least 1 (one) second at 1050 ¡À 50o C, with 3% Oxygen in the stack gas.

 

 

4              Opacity of the smoke must not exceed 20% Viewed from 50 meters with naked eyes

5.             All the emission to the air other than steam or water vapour must be odourless and free from mist, fume and droplets.

 

6.             The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances.

 

Cadmium and compounds as     Cd

Mercury                                      Hg

Thallium                                     Tl

 

Chromium                                  Cr

Beryllium                                    Be

Arsenic                                       As

Antimony                                    Sb

Barium                                        Ba

Lead                                            Pb

Silver                                          Ag

Cobalt                                         Co

Copper                                        Cu

Manganese                                  Mn

Tin                                               Sn

Vanadium                                     V

Nickel                                           Ni

Hydrochloric                                HCL

Hydrofluoric acid                         HF

 Sulphur dioxide                           S02

 

7.             A 99.99% destruction and removal efficiency (DRE) for each principal organic hazardous constituent (POHC) in the waste feed where:

 

DRE = [(Win - Wout)/Win]*100

Where: Win = mass feed rate of the POHC in the waste stream fed to incinerator, and

    Wout = mass emission rate of POHC in the stack prior to the release to the atmosphere.

 

8.             The average dioxin and furan concentration in the emissions should not exceed 80ng/m3 total dioxins and furans if measured for a period of 6 to 16 hours.

 

Note:

All pollutant concentrations must be expressed at Oo C and 1.013 x 10 5 N/m2, dry gas and 11% oxygen correction.

 

Oxygen correction is computed as:

 

Es =          21 ¨C Os    x EM

21 - OM

 

Where:     Es   = Calculated emission concentration at the standard percentage oxygen concentration

EM           = Measured emission concentration

Os            = Standard oxygen concentration

OM           = measured oxygen concentration

 

10

Operation

1.             Materials destined for incineration should be of known origin and composition and must be only incinerated in a furnace that is registered for the particular type of waste.

 

2.      A record must be kept of the quantity, type and origin of the waste to be incinerated.

3.      The incinerator must be preheated to working temperature before charging any waste.

4.      The incinerator must not be overcharged.

5.             The incinerator must be in good working order at all times and must not be used if any component fails. Any malfunction should be recorded in a log book and reported to the relevant authority.

 

6.             The incinerator operator and all relevant staff must be trained to the satisfaction of the relevant control authority.

 

 

11

Housekeeping

The site where the incinerator is built must:

 

1.             Have running water.

2.             Have a solid floor.

3.             Have lighting if 24hrs operation

4.             Have fly ash containerization and storage before disposal.

 

12

Health & Safety (Protective Gear)

1.              Staff handling waste must be well trained on safe handling of hazardous wastes

2.             Staff must be provided with appropriate  protective gear such as, gas mask, aprons, gumboots, helmets, gloves, goggles.

 

3.      Caution and Warning signs must be provided.

4.      Fire fighting equipment must be provided

5.            There should be no smoking or eating on the site

 

 

¡¡

  Incinerator Answer:  

  reference website: http://www.clover-incinerator.com/incinerator_msw1000.htm

burner incinerator lpg burners for clinical waste calculating capacity for incinerator capacity300kg certificate clover incinerator
cheap incinerators


chemical liquid waste incinerator of capacity 20kg/hr china companies incinerator china household incinerator china incinerator
manufacturer china manufacture crematory

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

November, 2012

2012-11-18

2012-11-19

2012-11-20

2012-11-21

2012-11-22

2012-11-23

2012-11-24

2012-11-25

2012-11-26

2012-11-27

2012-11-28

2012-11-29

2012-11-30

December, 2012

2012-12-01

2012-12-02

2012-12-03

2012-12-04

2012-12-05

2012-12-06

2012-12-07

2012-12-08

2012-12-09

2012-12-10

2012-12-11

2012-12-12

2012-12-13

2012-12-14

2012-12-15

2012-12-16

2012-12-17

2012-12-18

Jun, 2013

2013-06-01

2013-06-02

2013-06-03

2013-06-04

2013-06-05

2013-06-06

2013-06-07

2013-06-08

2013-06-09

2013-06-10

2013-06-11

2013-06-12

2013-06-13

2013-06-14

2013-06-15

2013-06-16

2013-06-17

2013-06-18

2013-06-19

2013-06-20

2013-06-21

2013-06-22

2013-06-23

2013-06-24

2013-06-25

2013-6-26

2013-06-27

2013-06-28

2013-06-29

2013-06-30

¡¡

Nanjing Clover Medical Technology Co., Ltd.

Rm.411, 07 Building, East Wanda Plaza, 58# Yunjin Road, Nanjing, P.R.China Post Code: 210019
Tel: +86-25-84610201 Fax: +86-25-84610406
Website: www.clover-incinerator.com Email: [email protected]

Copyright 2010 Clover Medical Limited All Rights Resered.